Claas  LLC “Mirovaya Technika” — authorized dealer
Happy Holidays!

Happy Holidays!

23 december

We congratulate on the coming New Year and Merry Christmas!

Read more

Dear colleagues, partners, friends!


Please, accept our warmest congratulations on the coming New Year and Christmas!

Let the holiday be shiny and joyful. Let the New Year be rich of bright ideas and profitable projects.

We hope that the Year 2016 will multiply the achievements of the outgoing year and ensure steady development.

Let all dreams come true and new plans be realized!


"MirTech" Team

Collapse
Parade of achievements

Parade of achievements

8 december

From 24 to 27 November 2015 in Krasnodar, held XXII International Agricultural Exhibition "YUGAGRO"

Read more

The YUGAGRO exhibition-2015 became the most large-scale over its history : 680 exhibitors from 30 countries of the world and 38 regions of Russia presented the production and innovative development. In 4 days of work the exhibition was attended by more than 15 000 people it is 41% more than last year, the total area of expositions made 56 400 square meters.

On November 26, during official visit, the assessment to the YuGAGRO exhibition was given by the governor of Krasnodar Krai Veniamin Kondratyev and the Assistant to the President Igor Levitin, and also vice-governors Andrey Korobka, Sergey Altukhov and Andrey Alekseenko.

During survey the special attention by the dignitaries was focused on the stand of the Mirovaya Technika company. On the area of 1000 square meters the best samples of import agricultural machinery settled down: the wheel tractors AXION 8 and 9 series and a novelty of a season 2014 – a combine harvester TUCANO 580 with a grain harvester VARIO - production of the German concern CLAAS, and also LEMKEN’s seeder Solitair and MUCK SPREADERS of SAMSON.

The production model of new CLAAS plant, which had a ceremonial opening on October 1, 2015, occupied one of the central places at the stand of “Mirovaya Technika”.

It is important to note that the TUCANO combine presented by "Mirovaya Technika " can be considered domestic by right: in spite of the fact that it is released under the German brand, the car is made in Kuban.

Collapse
All CLAAS innovations at one place!

All CLAAS innovations at one place!

3 november

The technical novelties developed by engineers of the company received five silver medals from expert jury of an exhibition.

Read more

Again production and innovations of CLAAS company have succeeded at the international exhibition Agritechnica 2015 of agricultural machinery. The technical novelties developed by engineers of the company received five silver medals from expert jury of an exhibition.

  • System 4D purification of grain on a combine harvester LEXION 70

Up to this day the 3D system of cleaning was the last achievement of equipment applied in CLAAS machines In order to compensate a small cross slope. New 4D cleaning simplifies management of hybrid models of LEXION 700 combines and allows using completely their productivity and possibilities of purification of grain even on slopes. The system joins along with separation of residual grain that allows to reduce cleaning volume.

  • System of automatic control of mass flux on a combine harvester of LEXION 700

System of automatic control of mass flux – the new assistant to the machine operator on the LEXION 700 combine which assumes control of a weight stream from a harvester to a straw chopper. It allows to reach the maximum productivity and at the same time to avoid critical high loadings at a large flow of mass.

  • MULTI CROP CRACKER MCC MAX system on the new JAGUAR silage combine

The MCC MAX is a new system of processing of corn on a silo used in the JAGUAR combine. Rollers of a crusher of the MCC MAX are calculated on crushing of corn on a silo with a range of length 7-22 mm that is the most widespread at agricultural producers. In comparison with traditional crushers, the MCC MAX allows to reach the bigger range of length are sharp also percent of dry weight at excellent results of processing. It raises milk yields and reduces need for additional food.

  • AUTOMATIC PRESS CONTROL system – a novelty in CLAAS QUADRANT press sorters

Thanks to APC - system of the automatic adjustment of pressing used in the large packing press sorters of QUADRANT 5200 and 4200 even inexperienced machine operators can reach the maximum results now and make equally pressed wads irrespective of their density. Adjustment of optimum pressing is defined depending on loading of the machine and quality of a twine.

  • The assistant to breakdown CLAAS stint - reduction of technological time for 6%

Until now, by experience and the settled stint habit in the field break proceeding from the greatest length of rutting. With introduction of the assistant to breakdown of stint, CLAAS for the first time became possible to define strategy of the movement of the car for each case and precisely to predict time, necessary for processing. Results of calculations allow to define time necessary for processing of a field. On average, time of processing of a field is reduced by 6%".

If you want to receive exhaustive information on the new directions and technologies in agricultural mechanical engineering, to learn more about modern models of equipment, you need to visit the stand of CLAAS Company on stand №13С05 in hall 13 from 14 till 20 November!

Collapse
With love to the ground

With love to the ground

12 october

We congratulate all toilers of agriculture with a professional day from the heart and sincerely tell you thanks for your work!

Read more

Dear friends, colleagues, partners!

Heartily we congratulate with a professional day, who devoted the life to the mother earth we wish you favorable weather, a fertile field and record harvests. Thanks for your important, daily, laborious work. Let your hands don't know fatigue, and eyes always rejoice to the earing field!

Yours “Mirovaya Technika”

Collapse
The opening of the second phase of the plant CLAAS

The opening of the second phase of the plant CLAAS

7 october

October 1, 2015 in Krasnodar the official launch of the second phase of the plant for the production of agricultural machinery CLAAS took place.

Read more

The opening of a full production cycle has become the largest project CLAAS in Russia and Europe. First CLAAS production plant in Russia was opened in Krasnodar 2005. The investment in its construction amounted to 20 million euros then. Since then, the plant had produced more than 4,500 units of agricultural machinery. Investment in the expansion of the existing production exceeded 120 million euros. The company will join the four largest plants above 11 plants of CLAAS in the world with the launch of the second phase of the plant in Krasnodar  and it will become the most modern plant for the production of agricultural machinery in Europe.

Internationalization is one of the main CLAAS objectives. The company CLAAS took a further most important decision in its history on intensification of production in Russia being in Russian market from 1992 and opening a plant in Krasnodar in 2005. In the second phase of the plant complete production cycle will be organized. It will include such operations as laser metal cutting, metal bending, welding semi-automatic machines, surface preparation and cataphoretic priming on an automated line, powder coating. Production area of the company increased by 9 times and it is about 45000 m2 nowadays. The possibility of the plant will increase in 2-2,5 times after commissioning of the second stage of production and amount of the production will be around 2000 – 2500 units per year.

Thus, the launch of the second phase of the plant opens new perspectives for CLAAS. At first the company will be able to meet the demand of Russian farmers and farmers of neighbouring countries by increasing the number of the plant units which  produce products. Secondly the company will be able to reach the level of localization of more than 50 % due to the deepening of production, to receive equal conditions for competition with Russian producers, in particular, to get the recognition of CLAAS as Russian manufacturer of agricultural machinery and it can take part in the Federal program of subsidizing of grain harvesters produced in Krasnodar. Thus the launch of the second phase of the plant in Krasnodar region fits policy of import substitution at the best at present.

According to the Chairman of the Supervisory Board and Deputy Chairman of the Board of CLAAS founders Kathrine Claas-Muehlhaeser: «The expansion project is a model project of successful Russian-German economic cooperation in Krasnodar. It seemed impossible to realize it for a couple of years allowing all difficulties which every company confronts at the launch of its production, especially abroad. But even the impossible is possible! We never refuse decisions which were previously taken and we adhere strictly to our strategy. Russia is a priority market for us. If we decided to be present on the Russian market, if it was to enhance our production, despite the current economic situation, we did it».

«On behalf of the Ministry of industry and trade of the Russian Federation and from myself personally I congratulate you on the opening of the second phase of the CLAAS factory in the Russian Federation. It is particularly important that a full technological cycle of production and hence ambitious targets are in respect of production localization. I am sure that Russian production CLAAS agricultural machinery will take a worthy place in the domestic market and are appreciated by foreign consumers", - said in his speech, the Deputy Minister of industry and trade of the Russian Federation Alexander Morozov.

Collapse